Air temp sensor with M12x1.5 threads for measuring Intake air temp (iAT) or other places in your induction system
The main body is made from brass metal with a 17mm spanner hex. NTC sensor element is covered with protective plastic housing
Electrical connection: 2Pin “EV1” connector for JPT terminals.
The mating connector for this sensor can be found below, or click here: connector
TSM125 NTC resistor spec:
°C (celsius) | Ohm: | |
−20 | 16500 | |
30 | 1789 | |
100 | 196 | |
Reviews
There are no reviews yet.