Universal temp sensor with 1/8″ NPT-27 threads. These threads are the most common type for aftermarket applications and will fit most sensor adapters.
Main body is made from brass metal with a 17mm spanner hex. It’s recommended to use thread sealant or tape when mounting.
Electrical connection: 2Pin “EV1” connector for JPT terminals.
The mating connector for this sensor can be found here: connector
TSX108 NTC resistor spec:
Please note that this sensor has relatively low impedance and will require a strong pullup resistor
°C | Ohm: | |
−20 | = | 10270 |
30 | = | 808 |
100 | = | 72 |
(updated 2021.01.04)
Reviews
There are no reviews yet.