Situne Community

Information From Situne => Smart Dash => Topic started by: oletorv on 12 August 2019, 13:10

Title: Smart Dash App CAN-Bus Setup [Howto]
Post by: oletorv on 12 August 2019, 13:10
In this post we will go in depth on setting up the DAH-280's CAN-Bus from the Smart Dash iOS App.


Prerequisites:

CAN-Bus setup

On the main screen of the app select menu button:

(https://i.postimg.cc/9C4QGj5s/Smart-Dash-Touch-Menu-Button.png)

Then select the setup option:

(https://i.postimg.cc/GcPn1d68/Smart-Dash-Touch-Setup-Menu-Button.png)

Then select the your device from the list:

(https://i.postimg.cc/syMyMdh8/Smart-Dash-Touch-My-Device-Setup-Button.png)

The DAH-280 settings menu will then be shown, the CAN-Bus #1 is the options at the top

(https://i.postimg.cc/8NHV3pQ7/Smart-Dash-DAHTop-Setup-Menu.png)

The first thing one needs to setup is whether or not the electronic termination should be on or off, touch the button to turn on or off termination:

(https://i.postimg.cc/XjCrcZPG/Smart-Dash-Configure-CAN1-Bus-Termination.png)

The next thing we need to configure is the protocol which the ECU communicates. This is selected by touching the CAN1 Protocol option:

(https://i.postimg.cc/0kRkvVtj/Smart-Dash-Configure-CAN1-Bus-Protocol1.png)

Then scroll through the options to select the protocol you want to use, and touch "Select":

(https://i.postimg.cc/DnmtCqgM/Smart-Dash-Configure-CAN1-Bus-Protocol2.png)

The CAN-Bus protocols implemented by 12.08.2019 are:

After this the CAN-Bus #1 Speed must be setup :

(https://i.postimg.cc/NQBzrSMm/Smart-Dash-Configure-CAN1-Bus-Speed1.png)

Select the correct speed from the list and touch "Select":

(https://i.postimg.cc/FrHfdrt8/Smart-Dash-Configure-CAN1-Bus-Speed2.png)

The CAN #1 Channel list will now appear, and let you select which channels should be uploaded to Track Attack.

After this step the CAN-Bus #1 setup is complete, touch the Save button to write CAN-Bus #1 configuration into DAH-280:

(https://i.postimg.cc/cxy90bVv/Smart-Dash-Touch-My-Device-Save-Button.png)